What are the steps to use the slitting machine?

The slitting machine is a pre-press and post-press equipment that cuts a large roll of paper, foil, fleece, aluminium foil, glitter tape and other thin materials into small rolls of different widths. It is often used in paper production, printing and packaging machines.

What should be considered before the slitting machine is operated?

What is the process of using a slitting machine?

What are the main components of a slitting machine?

What should be considered before the slitting machine is operated?

1. The slitting machine cuts the entire roll or rail of raw materials into a fixed length.

2. The slitting control with fixed length is divided into static and dynamic slitting.

3. The most important performance index when cutting with a fixed length is the precision of the cut and the good consistency of the final product length.

4. The cut length can be set infinitely. If the actual cut length is incorrect, it can be calibrated simply by setting parameters.

What is the process of using a slitting machine?

Propulsion, film insertion and foil connection

1. Loading: according to the specifications of the cutting plan, according to the operating instructions of the crane and according to the actual situation, raise the corresponding mastercoil on the ageing frame, on the winding frame of the slitting machine, apply the steel core with the control button in accordance with the direction chosen from inside and outside of the crown surface and leave the steel bearing arm and running crane.

2. Film insertion: If there is no film on the slitting machine, the film must be drawn in. Bind the end of the original film to the ring eye of the film wool chain with the film insert device and the function button of the slitting machine and start the film insert button to distribute the film evenly along the cutting direction on each roll.

3. Film recording: If film is on the slitting machine and the connection is changed, use the vacuum film recording table to bring the film recording table into working position, manually smooth the film on the first reel of the slitting machine and start the upper vacuum pump to absorb the film, In order for the film to be absorbed smoothly on the film recording table, glue the double-sided tape and cut off the excess film under the tape, smooth the film on the drainage frame and start the lower vacuum pump to adsorb the film smoothly. Remove the paper layer on the tape and smooth the adhesive layer. The joint must be clean and free of wrinkles. Then switch off the upper and lower vacuum pumps and open the film recording table to the non-working position.

What are the main components of a slitting machine?

(1) Rack section

It's welded with thick steel plates.

(2) Development

The rewind uses a inflatable 3-inch roller and a magnetic powder tension regulator to rewind. This machine is easy to use for cutting edge strips and the maximum winding diameter can reach 600 mm.

(3) Disposal

The deflection assumes a 3-inch inflatable deflection wave.

(4) Cutting part

The industrial slitting machine can use an industrial scalpel blade or a flat knife type (artificial blade), and the knife resistance can be set between 18 mm and 1600 mm.

(5) Host part

Mainly uses a 5-car engine, uses an electronic speed control system and adjusts the speed of the machine manually when used.

(6) Leadership

The whole machine uses chromed steel tubes, each of which has been dynamically balanced.

ZHEJIANG GREENPRINT MACHINERY CO.,LTD has been focusing for several years on the development and production of slitting machines. And she undertakes to provide every customer in the furniture industry with the perfect service.