What does slitting machine mean?

The slitting machine is mainly used for: fibrous material; cutting of glitter tape, paper, insulating material and various film materials, particularly suitable for cutting narrow bands (fleece, paper, insulating material, glitter tape, foil, etc.).

What are the characteristics of slitting machines?

What is the production principle of the slitting machine?

What are the product characteristics of the slitting machine?

What are the characteristics of slitting machines?

The slitting machine is mainly used for cutting the mother rolls of large rolls into products of different widths and can verify the quality of the products. Its main features are as follows:

1. Evaporating photoelectric correction, high precision; Control mode is divided into two modes: manual transmission and automatic transmission

2. There are two winding methods: surface development and middle development;

3. The voltage of the feedback coil and the feedback coil assumes automatic voltage control; the control procedures include a voltage feedback control and a cone control.

4. Two cut-out knives, circular and air-meter cutters, are reliable and easy to adjust in quality;

5. By using the surface centre winding, the quality of the winding is uniform and stable;

6. The machine stops automatically when the length is set and the length is automatically counted in metres;

7. In the case of edge insulation, the edge material is carried out through the fan;

8. Suitable for cutting narrow strips (insulating material, glitter tape, foil, etc.) of various thin coils.

What is the production principle of the slitting machine?

1. The paper slitting machine must cut the entire roll or raw material to a fixed length, e.g. plastic packaging materials, packaging cartons, steel plates, film, leather, wooden chips, etc. in order to use the slitting control with a fixed length.

2. The cut length can be set infinitely. If there is an error in the actual cut length, it can be easily calibrated by setting parameters.

3. The cutting control of the paper slitting machine is divided into static and dynamic cutting: it stops exactly when the set length is reached, then static cuts the processing and restarts the process after cutting; When the set length is reached, the machine does not stop. Cutting signal, the slitting machine cuts and processes dynamically during the material movement.

What are the product characteristics of the slitting machine?

1. Easy operation control panel: Each part of the sliding machine is controlled and operated centrally.

2. Triple length adjustment: slitting machine extended three-stage grading search and counting to ensure an accurate winding length.

3. Automatic alternation: After completion of the winding process, the two waves are automatically replaced, with easy operation and high efficiency.

4. Labelling instructions: Automatically stop the machine after reaching the label length and place the label with the film opening on the platform.

5. Rear feeding mode: Feeding from the back of the worksurface, and the slitting machine is equipped with a rubber printing wheel to reduce the noise of tearing and pulling the tape and to unload the material stable.

When buying slitting machines, however, pay attention to their quality. ZHEJIANG GREENPRINT MACHINERY CO., LTD has various slitting machines that can increase the products and make them more effective, reliable and consistent.