Why do we choose the electric die cutting machine?

As a new printing tool, die cutting machine has been widely used in various fields of production. Let's take a look at its specific information.

What should we notice after using die cutting machine?

How to pay attention to the safety of die cutting machine?

How to adjust the speed of the die cutting machine?

What should we notice after using die cutting machine?

1. Adjust the die cutting pressure according to the thickness of the paper. The pressure should be gradually increased from light to heavy to 80% penetration during adjustment, otherwise it will cause equipment damage

2. Adjust the position of the upper and lower thimble of the paper ejection part, and lock it

3. After adjusting the parts of the die cutting machine, produce samples according to the box sample requirements, check that there is no quality problem, and normal production can be done after the supervisor signs the samples.

How to pay attention to the safety of die cutting machine?

Because there are many safety switches on the fully automatic flat die cutting machine, when the equipment is working, as long as the operator implements it in accordance with the standard and does not violate the regulations, there is no problem. Of course, if you get into the equipment without opening the safety door, you are looking for a chance to reincarnate. This situation has been heard before. The captain went to deal with the problem, but none of the security doors were opened. The deputy didn't know, so he directly activated the equipment, and the captain was reimbursed on the spot.

How to adjust the speed of the die cutting machine?

1. Turn on the power and check the equipment. Test the machine for a few minutes before setting up the mold to ensure that the machine is working properly. When the die cutting machine and the continuous machine punch the product, the knife mold must be straight, otherwise the punched product is likely to be short of material. Remove the template from the machine platform and place it on the workbench, and stick the mold to the tape. prison.

2. After installing the template, tighten the right or left screws and increase the pressure so that the gap between the upper and lower templates must be higher than the thickness of the mold plus the PC board. The lower template is fixed on the lower part of the mold with tape on the PC board. , Use white paper to paste the tape on the other side of the PC board that is not taped, the PC board is on the bottom, and the white paper is in the middle; after the carbon paper is placed, the pressure is slowly reduced, and the host of the die cutting machine is used to slowly test the pressure until There is a whole knife mold on the white paper.

3. The stamp on the white paper is to facilitate the confirmation of the debugging position when printing the product. Place the paper under the PC board and use positioning foam to make the positioning. Place the material for a test punch, remove the waste, and check the product. If the product is found to be continuous or has burrs, take out the paper placed under the PC board, and paste the transparent tape on the corresponding defect.

We have professional staff who can provide you with personalized customized die cutting machines. If you are interested in this product and want to know more information, please contact ZHEJIANG GREENPRINT MACHINERY CO.,LTD.